8″ Rugged Vehicle Mount Computer with Intel Atom® E3950 Processor, Projected Capacitive Touch Screen and IP65

VMC 2020, an 8-inch all-in-one robust vehicle mount computer, is designed for the warehouses, port, logistic and material handling markets. It implements the latest Intel Atom® E3950 processor on both Windows and Linux platforms and offers complete IP65 and IK08. VMC 2020 is able to support analog camera x 4 (optional) for security purposes and takes less than 1 second to see video content. An optional backup battery can help to back up data when the car power battery stops supplying. LCD panel 1,000nits guarantees to reach sunlight-readable.

Add to WishlistAdd to Compare


  • 8" TFT LCD monitor with projected capacitive touch screen
  • IPS LCD with wide viewing angle and resolution 1280 x 720
  • Touch panel cover thickness 3mm for IK08 protection
  • Sunlight readable capability: 1,000nits LCD brightness
  • CVBS input for analog camera x 4 (optional)
  • Isolated CANBus 2.0 x 1
  • Back-up battery for approx.15 min of operation (optional)
  • Wide range DC input from 9V~60V DC in
  • Complete IP65 waterproof
  • Touchscreen is operable with various gloves (even with water spillage)
Amplicon Middle East-Nexcom-VMC 2020
LCD Panel

8-inch TFT LCD panel with LED backlight
1280 x 720 pixels (HD)
Brightness: 1000 cd/m² (typical)
Viewing angle: 170° (H)/170°(V)
Contrast ratio: 1000:1 (typical)

Touch Screen

Projected capacitive
Anti-glare coating surface
Transmission rate: 80 ± 3%

CPU & Chipset

Intel Atom® processor quad core E3950, up to 2.0GHz, 12W, 4 core


1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. Default 4GB


1 x eMMC 64GB (BOM optional 128GB)
1 x mSATA (occupied mini-PCIe slot)


1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0)
1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0/SATA 3.0)
1 x M.2 3042/3050/3052 Key B socket (USB2.0, USB 3.0/PCIe 2.0 (BOM optional)) for LTE/5G NR module with 2 x external Nano-SIM slot

GNSS and Onboard Sensor

1 x Default u-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou
Optional M8U modules with dead reckoning available
G Sensor (3-axis, 10-bit resolution)


1-port LAN, 10/100/1000 Mbps Intel® I210-IT GbE


TPM 2.0: Infineon SLB9665TT2.0FW5.62 (BOM optional)

I/O Interface-Front

Volume control keys (+/-) with LED
Brightness control keys (+/-) with LED
F1~F4 programmable function keys with LED
1 x Shift key with LED
1 x Light sensor
5 x LED indicators (power, battery, WWAN, WLAN, storage)
2 x Built-in 2W speakers
1 x Built-in Mic

I/O Interface-Lateral

Left Side
– 1 x System reset button w/ cover
– 2 x Nano SIM slot w/ cover
Right Side
– 1 x Power button
– 1 x USB 3.0 type A connector w/ cover
– 1 x Mic-in, 1 x Line-out w/ cover

I/O Interface-Rear/Bottom

1 x Full RS232 (COM, w/ 5VDC, 12VDC)
1 x Power connector, M12 A-coded 5-pin
1 x 10/100/1000 Mbps LAN, M12 A-coded
1 x M12 A-coded 8pin for 2 x USB 2.0
1 x M12 (MULTI PORT1, A-coded 8-pin)
– 2 x GPI
– 2 x GPO
– 1 x Isolated CANBus 2.0B
1 x M12 (MULTI PORT2, A-coded 12-pin)
– 1 x RS232 (Tx, Rx)
– 1 x RS232 (Tx, Rx)/RS422/RS485
– PWM (speed)+direction+GND, optional 4 x composite video input/ CAN-06
2 x SMA connector for WWAN
3 x SMA connector for WLAN
1 x SMA connector for Bluetooth
1 x SMA connector for GNSS

Power Management

9V~60V DC in
Back-up battery for approx. 15 min of operation (optional)
Reverse protection/over voltage protection/under voltage protection
Ignition on/off control & programmable on/off delay timing
Wake up by LAN, SMS, RTC and ignition

Operating System

Windows 10
Linux (Kernel 4.x)


250 x 179 x 67.5 mm


2.6 kg


Cooling system: fanless
Enclosure: plastic
IK Rating: IK08 (housing and touch screen)
Mounting: VESA 75
Ingress protection: complete IP65

Operating temperatures

30°C to 60°C, ambient with air and without battery

Storage temperatures

-40°C to 80°C

Relative humidity

10% to 90% (non-condensing


2g@5~500 Hz (in operation)
– Operating: MIL-STD-810G, 514.6 Procedure 1,Category 4
– Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24


Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 40g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75g


CE/FCC class B/E13/IK08

Data Sheet

Download / View