• NEXCOM

NEXCOM VTC 7260-5C4

Fanless AI-Aided Vehicle Computer With 11th Gen Intel® Core™ CPU

VTC 7260-xC4 is an in-vehicle AI-Aided telematics computer designed with 11th Gen Intel® Core™, which performs 25% more computing power than the former generation. Moreover, its 10-year product lifespan can satisfy the long-term support suitable for any in-vehicle applications.

Add to WishlistAdd to Compare

KEY FEATURES:

  • 11th Gen Intel® Core™, cost-efficient performance
  • Compact, rugged and fanless design
  • Rich I/Os, 4 x PoE+, GbE, 4 x USB 2.0/3.2 & 2 x RS232/422/485
  • 1 x 2.5” SSD, 1 x mSATA and 1 x NVMe SSD for data integrity
  • Up to 3 combinations of LTE/5G, Wi-Fi 5/6 for mobile router function
  • 9~36V DC-IN with ignition control & OCP/OVP
Nexcom-VTC-7260-5C4-Amplicon-Middle-East-1
CPU

11th Gen Intel® Core™
Core i5-1145GRE, base frequency 1.5GHz/ 2.6GHz, 4c, 8 MB
Intel® Smart Cache (VTC 7260-5C4)
Graphics:
– Intel® Iris® Xe graphics, 1.3GHz
– Max resolution: 4096 x 2304@60Hz (HDMI)
– DirectX: 12.1, OpenGL: 4.6

Memory

2 x SO-DIMM, DDR4-3200MHz
4GB+4GB in default, 64GB in max.
ECC (in-band ECC), dual-channel support

Storage

1 x 2.5” SSD (15mm height)
1 x mPCIe for mSATA (SATA 3.0)
1 x M.2 2242/2280 Key M NVMe SSD (PCIe 4.0 x4), Hailo AI card in option

Expansion slots

1 x mPCIe socket (PCIe 3.0 + USB 2.0/ USB 3.2), 2 x micro SIMs supported
1 x M.2 3042/3050 Key B socket (USB 3.2), 2 x micro SIMs supported
1 x M.2 2230 Key E socket (PCIe 3.0 x2 & USB 2.0), Wi-Fi or Hailo AI card in option)

Display

1 x HDMI 2.0a/b, up to 3840 x 2160@60Hz
1 x VGA, up to 2560 x 1600@60Hz
1 x DP, 4096 x 2304@60Hz

PoE+

4-port independent 2.5GbE, RJ45 connector
– IEEE 802.3 af/at, total 60W
– 9K byte jumbo frame
– PTP (IEEE 1588) support
– Controller: Intel® I225-IT

GbE

1-port independent GbE, RJ45 connector
– vPro (iAMT) support
– 9K byte jumbo frame
– PTP (IEEE 1588) support
– Wake-up function (WoL)
– Boot from PXE (UEFI)

USB

3 x USB 3.2 Gen1:
– Host type-A connector
– 5V@900mA each
– Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed)
1 x USB 2.0, host type-A, 2 x USB 2.0 water-type reserved

Serial Port

2 x full RS232/422/485, selectable
2 x full RS232 wafer-type reserved
– RS232 working voltage, +- 9V, baud rate up to 115.2kb/s

Security

TPM 2.0: Infineon SLB9665TT2.0FW5.62

Audio

Line-out, unbalanced stereo, left & right channel
MIC-in, stereo
Line-in reserved (wafer connector)

MEMS Sensor

3D accelerometer and 3D gyroscope
Controller: ST LSM6DSLTR

DI/DO

4-bit input
– Source: 9~36VDC (12V@1.1mA/24V@2.2mA)
– External: 0~33VDC pull-high, high-level, 3.3-33 VDC; low-level, 0-2VDC
4-bit output
– Source: 9~36VDC (nominal 35mA@24V):
– External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)
Source or external can be selected by DIP switch (default: source type)

CAN bus

1 x CAN 2.0A/ 2.0B
IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV/15KV (contact/air)
2.5KV isolated

GNSS

U-blox NEO-M9N GNSS module for GPS/GLONESS/QZSS/Galileo/Beidou
Optional DR (Dead Reckoning) function, NEO-M8U/M8L

Power Supply

Nominal voltage: 9~36V
Cranking voltage: 6V~9V (less than 20 sec)
OCP & UVP (shut down once exceeding 37V)
Ignition on/off control & programmable on/off delay timer
Optional for remote power on/off control

I/O ports, Front-plate

ATX power button, Reset button
9 x LED Indicators, 1 x VGA (DB15), 2 x COM (DB9, RS232/422/485), 1 x Multi-port (DB15, 4xDI, 4xDO, CAN, DR signal) , 1 x Ext. (DB15, reserved), 1 x PR-SMA for GNSS, 4 x PR-SMA for WLAN

I/O ports, Rear-plate

2 x Audio jack (Line-out & MIC-in)
3 x USB 3.2 type A, 1 x USB 2.0 type A
1 x HDMI, 1 x DP, 4 x PoE+ (2.5GbE, RJ45), 1 x GbE, 9~36VDC (3-pin Phoenix)
4 x SMA for WWAN, 4 x antenna holes reserved

I/O ports, side-plate

2 x SIM slots (SIM1-1, SIM2-1)

Dimensions

210.0mm x 173.0mm x 75.0mm (w/o mount brackets)
234.0mm x 173.0mm x 81.0mm (w/ mount brackets)

Weight

3.5kg

Operating temperatures

-30°C~60°C (15W TDP & PoE)

Storage temperatures

-40°C~85°C

Relative humidity

10%~95% (non-condensing)

Vibration

-Operating: MIL-STD-810H, 514.8C Procedure 6, Category 4
– IEC 60068-2-64: 2.0g@5~500Hz
-Storage: MIL-STD-810G, 514.6E Procedure 1, Category 24, 7.7g

Shock

MIL-STD-810G, 516.6 Procedure I, trucks and semi-trailers=40g
Crash hazard: Procedure V, ground equipment=75g

Standards/Certifications

CE approval, FCC Class A, UKCA, E13 Certified

Operating System

Windows 10 64-bit/Windows 10 IOT 64-bit, Windows 11
Linux (Ubuntu 18.04)

External Cable (option)

DB15 multi-port adapter cable, 20cm

Data Sheet

Download / View