NEXCOM VMC 110/111

7″ Mobile Data Terminal with ARM® Cortex®-A9 platform

VMC 110/111, a 7-inch all-in-one mobile data terminal, targets fleet management, transportation, and logistic applications. Its compact and rugged design with flexible expansion capability is perfect for the limited space on the driver cabinet and strong requirement on wireless communication. For wireless communication, VMC110/111 is capable of supporting GPS, Dead Reckoning, Wifi, 3G, and LTE. Besides, VMC 110/111 works on both Android and Linux operating systems, which are the mainstream operating systems in the future.

Add to WishlistAdd to Compare


  • 7" 1024 x 600 TFT LCD monitor with resistor touch screen
  • ARM® Cortex®-A9 Dual Core Processor with 1GHz frequency
  • Compact and fanless design
  • On screen F1 ~ F5 programmable function keys
  • Linux and Android operating system
  • GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
  • iButton & RFID for ID identification
  • Dual CAN Bus 2.0B
  • OBDII (ISO15765-4)/SAE J1939 protocol
  • Wide Range DC input from 9 ~ 36V
  • SW Utility for function demonstration on Android platform
  • CE/FCC/Emark
Amplicon Middle East-Nexcom-VMC 110-111
LCD Panel

7-inch TFT LCD Panel with LED Backlight
1024 x 600 pixels
Brightness: 500 cd/m² (typical)
Contrast ratio: 800:1 (typical)
Viewing angle: 150(H), 145(V)

Touch Screen

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 80% ± 3%

CPU & Chipset

ARM® Cortex®-A9 Processor with 1GHz frequency
Freescale Dual Core


Onboard DDR3L 2GB


1 x Micro SDHC Slot
EMMC: 8G on board


1 x Half-size mini-PCIe (PCIe + USB) for WLAN
1 x Full-size mini-PCIe (USB + UART) for WWAN
OBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional)
RFID (optional)

I/O Interface-Front

F1 ~ F5 programmable function keys
Light Sensor
Internal Mic-in
2 x Built-in 2W speakers
3 x LED indicators (Power, Storage and WWAN)

I/O Interface-Lateral

Right side
– 1 x SIM card slot
– 1 x Micro SD card slot
– 1 x USB 2.0 type A
– 1 x micro USB OTG for maintenance
Left side
– 1 x Power button
– 1 x Volume up/down
– 1 x Brightness up/down
– 1 x System reset button

I/O Interface-Rear/Bottom

1 x lockable power input with ignition
1 x RJ45 for LAN
2 x USB 2.0 Type A
– DB-15 connector
– Full RS-232
– RS-232/485
– CAN1 2.0B
DB-15 connector
– GPI x 3
Sink type: 5VDC TTL (default)
Source type: 3 ~ 28VDC
– GPO x 3
Sink type: 5VDC TTL (default), max current: 20mA
Source type: 3 ~ 28VDC, max. current: 150mA
– GPS DR (Speed, direction, GND)
– CAN2 2.0B (Default) & (BOM optonal for OBD II (ISO 15765-4 & J1939))
– iButton
1 x Mic-in
1 x Line-out
3 x Antenna on I/O
– Rear: 1 x GPS, 1 x WWAN
– Bottom: 1 x GPS, 2 x WWAN
2 x Antenna on housing for Wi-Fi

Power Management

9V~36V DC input
Selectable boot-up & shut-down voltage
Ignition: 8-level delay time on/off
Reverse protection/over-voltage protection/low-voltage protection
Wake up by SMS/RTC/ignition

Operating System

Linux YOCTO 2.0 by Request
Android 5.1


212.9mm (W) x 144.97mm (H) x 40mm (D)(8.4" x 5.7" x 1.6")




Cooling System: Fanless
Enclosure: Plastic PC/ABS + Metal heat-sink
Mounting: VESA 75/100 & Desktop mounting
Ingress Protection: Front panel IP54

Operating temperatures

Ambient with air -20°C to 70°C

Storage temperatures

-30°C to 80°C

Relative humidity

10% to 90% (non-condensing)


Vibration test: IEC 60068-2-64, 2.5G
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24


MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g


CE/FCC class B/E-Mark

Data Sheet

Download / View