Amplicon Middle East-Nexcom-VTC 1020
  • NEXCOM

NEXCOM VTC 1020

Intel Atom® x5-E3930 processor Fanless In-Vehicle Computer

VTC 1020, a compact, rugged, and entry-level vehicle computer with Intel Atom® x5-E3930 processor dual-core 1.3GHz, is designed for the harsh in-vehicle environment. Because of the compact design, it is especially for the vehicles with limited space to locate the computer system, but without compromising with its space to scarify its features. VTC 1020 has on board CAN 2.0B and an optional OBD interface (SAE J1939) for vehicle diagnostics and driver behavior management.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Compact and fanless design
  • Built-in GPS receiver with optional dead reckoning function
  • Variety of wireless communication options
  • Built-in CAN bus 2.0B. Optional OBD SAE J1939
  • Wide range DC input from 9~36V
  • Smart power management with Ignition on/off delay via software control and low voltage protection
  • Certified by CE/FCC/E13 mark
  • 5 x RS232 and 2 x RS485
Amplicon Middle East-Nexcom-VTC 1020
CPU

Intel Atom® x5-E3930 processor dual core 1.3GHz
Memory

1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. Default 4GB
Video Output

–
Storage

1 x 2.5” SSD SATA 3.0
1 x mSATA
Expansion

1 x mini-PCIe socket (USB)
1 x mini-PCIe socket (PCIe + USB + mSATA)
Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning
Built-in G-sensor
Built-in TPM
GNSS and On Board Sensor

–
LAN

–
Security

–
I/O Interface-Front

1 x power button
4 x LED indicators for Status (programmable), Storage, WLAN and WWAN
1 x system reset button
2 x type A USB 3.0 compliant host, supporting system boot up
1 x DB-15 VGA
1 x HDMI
1 x SIM card socket
I/O Interface-Rear

1 x 9~36VDC input with Ignition and 20W typical power consumption
1 x 12V/2A DC output, SMBus, power button
1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet
1 x Audio-in, 1 x Audio-out
1 x DB9 COM port for 4 x RS232 Tx/Rx and 2 x RS485
1 x DB15 for multi port
– 1 x CAN2.0 (optional SAE J1939)
– 1 x RS232 Tx/Rx
– 1 x odometer and direction for optional DR
– 5 x programmable DIO
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3~24VDC
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3~24VDC
3 x Antenna hole for SMA-type antenna (WWAN/WLAN/GPS)
Power Management

Selectable boot-up & shut-down voltage for low power protection
HW design ready for 8-level delay time on/off at user's self configuration
Power on/off ignition, software detectable
Support S3, S4 suspend mode
Operating System

Windows 10
Linux YOCTO (by request)
Dimensions

185mm (W) x 120mm (D) x 45mm (H) (7.3" x 4.7" x 1.8")
Weight

1 kg (2.20 lbs)
Construction

–
Operating temperatures

-40°C to 70°C (w/ industrial SSD) with air flow
Storage temperatures

-40°C to 85°C
Relative humidity

10% to 90% (non-condensing)
Vibration

Vibration (SSD): 2g @5~500 Hz
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock

Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g
Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g
Standards/Certifications

CE approval
FCC Class A
E13 mark

Data Sheet

Download / View