7″ All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker

VMC 1100, a new generation 7-inch vehicle mount computer with a dual-core Intel Atom® processor, is designed for transportation and harbor applications requiring real-time vehicle tracking and job-dispatching. For real-time communication between driver and central control room, VMC 1100 provides the capability of a wireless connection from GPS, WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN connection. Dual CANBus 2.0B ( OBDII and J1939 protocol ), analog input, and PWM are able to help to receive car status more quickly and correctly. Due to the unique features above, VMC 1100 is perfect to use in harbor applications from container trucks, forklifts, container stackers….

Add to WishlistAdd to Compare


  • 7" WVGA TFT LCD Monitor with resistive touch screen
  • Built-in Intel Atom® Dual Core E3825 1.33GHz
  • Compact and fanless design
  • On screen programmable F1 ~ F5 function keys
  • Support GPS/WWAN tracker function for car-safety
  • RFID for ID identification
  • Built-in GPS (Option: Dead Reckoning Support)
  • GPS/WLAN/WWAN for wireless communication
  • Dual CAN bus 2.0B and optional OBDII (SAE J1939) for car diagnostic
  • Wide Range DC input from 9 ~ 36V
  • Military standard for vibration and shock
  • SAE J1113, ISO7637-2 and SAE J1455 conformity for power design
  • CE/FCC/EMark
Amplicon Middle East-Nexcom-VMC 1100
LCD Panel

7-inch TFT LCD Panel with LED Backlight
800 x 480 pixels (WVGA)
Brightness: 400 cd/m² (typical)
Contrast ratio: 600:1 (typical)

Touch Screen

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 78 ± 3%

CPU & Chipset

Intel® Atom™ Dual Core E3825 1.33GHz


One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
– Default 2GB


1 x SATAIII SATA DOM Slot (available option 16GB / 32GB / 64GB)


1 x Half size mini-PCIe socket (USB 2.0, PCIe 2.0)
1 x Full size mini-PCIe socket (USB 2.0, UART) for LTE module with 1 x external Mini-SIM
1 x External module for OBD/RFID module option (USB 2.0, UART)

I/O Interface-Front

F1 ~ F5 functions key
Light Sensor
Internal Mic-in
2 x Built-in 2W speakers
3 x LED indicators (Power mode, Storage and WWAN status)

I/O Interface-Lateral

Right side
– 1 x Micro SD card socket
– 1 x SIM card socket
– 1 x USB 3.0 host type A connector
– 1 x Mic-in, Line-out
Left side
– 1 x Power button
– 1 x System reset button
– Volume up/down or Brightness up/dow

I/O Interface-Rear/Bottom

1 x 5-pin Circular connector for Power/Ignition input
1 x RJ45 for LAN
1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)
1 x DB9 (Male) for
– RX/TX or RS-485
– 2 x CAN Bus 2.0
1 x DB15 (Female) for
– GPS dead reckoning interface (optional)
– 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI
Analog Input requirement for Voltages are measured
Channel: 2
Voltage range: 0 ~ 38V
Resolution: 8 bit
Input requirement for frequency, speed
Square wave
Channel: 2
Frequency signal offset voltage range: 0~15VDC, 1Hz~5KHz
Protection: +/- 500V spike
Frequency signal duty cycle range: 10% ~ 90%

Power Management

Selectable boot-up & shut-down voltage for low power protection
HW design ready for 8-level delay time on/off at user's self configuration
Power on/off ignition, software detectable
Support S3 and S4 suspend mode; wake on RTC and SMS

Power Design & Protection

Load dump and inductive load protection
Cold cranking protection
Transient voltage protection
Electrostatic discharge protection

Communication Module

1 x u-blox NEO-M8N module
(support GPS/Gloness/QZSS/Galileo/Beidou)
1 x WLAN or Bluetooth module for optional
1 x WWAN module for optional

Operating System

Windows 10
Windows 8 Professional, WES8
Windows 7, WES7
Linux Fedora (kernel V3.2.0)


213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")


N.W: 1.3Kg
G.W: 1.6Kg


Cooling System: Fanless
Enclosure: Plastic PC + ABS with aluminum die casting heatsink
Mounting: Support VESA 75, stand mounting
Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS
Power Input: 9 ~ 36VDC input with Ignition
Power Consumption: 26W
Ingress Protection: Front panel IP54

Operating temperatures

Ambient with air -20°C to 60°C

Storage temperatures

-30°C to 80°C

Relative humidity

10% to 95% (non-condensing)


3g @5 ~ 500Hz
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24


Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g


– CE, FCC class B, E-Mark
– SAE J1113
– SAE J1455
– ISO 7637-2
– EN 60950-1 LVD

Data Sheet

Download / View