Amplicon Middle East-Nexcom-nROK 6222-IMIoT
  • NEXCOM

NEXCOM nROK 6222-IMIoT

IntelĀ® Movidiusā„¢ AI Edge Vehicle Solution with Intel AtomĀ® E3950

nROK 6222-IMIoT, based on Intel AtomĀ® quad core processor E3950 (up to 2.0GHz), is specifically comply with stringent EN50155 standard in rugged, fanless and compact mechanism. nROK 6222-IMIoT provides complete communication capability between train and computer with build-in CAN BUS 2.0B interface. Equipped with intelligent power management, nROK 6222-IMIoT can be waked on by ignition, RTC timer or SMS message remotely. nROK 6222-IMIoT supports 4 x 802.3at/3af (Max. 60W) PoE ports to connect with IP cameras.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Built-in IntelĀ® Movidiusā„¢ Myriadā„¢-X mPCIe deep learning accelerator module
  • Intel AtomĀ® processor quad core E3950, up to 2.0GHz
  • 4 x PoE (802.3af/at, max. 60W)
  • Built-in u-blox-M8N GPS
  • Three video outputs, one VGA and two HDMI
  • 3 x mini-PCIe socket expansion
  • Dual external storage (compatible with 15mm disk)
  • 1 x USB DOM to run OS
  • 1 x SD card for exporting and backing up data
Amplicon Middle East-Nexcom-nROK 6222-IMIoT
CPU

Intel AtomĀ® processor quad core E3950, up to 2.0GHz, 12W, 4 core
Memory

1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. default 4GB
Myriad-X mPCIe Deep Learning Accelerator Module

1 or 2 Myriadā„¢ X MA2485 VPU
Per VPU with
– Up to 1 TOPS
– 16 programmable 128-bit VLIW vector processors
– CPUs 2 x LEON 4 cores (RISC; SPARC V8)
– On-chip accelerators 20+ image/vision processing accelerator
– Neural compute engine (DNN accelerator)
– Neural network capability neural compute engine
Video Output

Chipset IntelĀ® HD graphics 505
2 x HDMI 1.4b up to 4096 x 2160 @30Hz
1 x VGA up to 1920 x 1200 @60Hz
Google Edge TPU (Coral ML Accelerator Card)
Storage

2 x 2.5ā€ SATA 3.0 external SSD (compatible with 15mm drive)
1 x SD memory card 3.0 (externally accessible)
1x USB EDC for USB DOM
Expansion

1 x Full size mini-PCIe socket (USB 2.0), BOM optional M.2 Key B (USB2.0 + USB 3.0) with 2 x external SIM
1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0)
1 x Falf size mini-PCIe socket (USB 2.0 + PCIe 2.0)
GNSS and On Board Sensor

1 x Default U-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou
G Sensor (3-axis, 10-bit resolution)
TPM 2.0 (optional)
LAN and Power over Ethernet

4-Port LAN, 10/100/1000 Mbps I210-IT GbE, PoE 802.3af/at, max. 60W
1-Port LAN, 10/100/1000 Mbps I210-IT GbE
I/O Interface-Front

12 x LED indicators (including 3 x programmable LED)
2 x externally accessible SIM card socket with cover
2 x 2.5" removable SSD tray
1 x externally accessible SD card socket with cover
1 x reset button
1 x power button
1 x USB 3.0 type A (5V/0.9A)
2 x HDMI 1.4b
1 x M8 (6-pin) for 1 x Mic-in (mono), 1 x Line-out (Stereo)
2 x SMA antenna
I/O Interface-Rear

1 x M12 (5-pin) DC input with ignition
– 24 / 36 VDC (9~48V), non-isolation
1 x M12 X-coded LAN port, 10/100/1000 Mbps
4 x M12 X-coded PoE 802.3af/at (max. 60W)
1 x VGA
1 x M12 with two USB 2.0
1 x DB9 full RS-232 (isolation)
3 x SMA antenna
1 x DB15 (DIO)
– 4 x DI with isolation
– 4 x DO with isolation
– Vin, GND for GPIO
1 x DB15 (MULTI PORT)
– 1 x RS422/RS485
– 1 x RS232 (TX/RX)
– 1 x CAN 2.0B
Power Management & Software Support

Power input 24/36 VDC w/o isolation
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Support S3/S4 suspend mode
10~255 seconds WDT support, setup by software
SDK (Windows/Linux) including utility and sample code
Operating System

Windows 10/Linux
Dimensions

260mm (W) x 196mm (D) x 66.5mm (H)
Weight

3.4kg
Operating temperatures

-20Ā°C~60Ā°C (w/ Google Edge TPU & industrial SSD) with air flow
Storage temperatures

-40Ā°C to 80Ā°C
Relative humidity

10% to 90% (non-condensing)
Vibration

2g@5~500 Hz (in operation, SSD)
Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40gNon-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications

CE
FCC Class A
EN 50155:2017
– Ambient temperature EN 50155, class OT4 (-40 ~ 70Ā°C)
– Shock and vibration IEC 61373 class B
– Interruptions of voltage supply class S1,S2
– Supply change over class C1,C2
– EMC EN 50121-3-2:2016

Data Sheet

Download / View