Amplicon Middle East-Nexcom-VTC 7230
  • NEXCOM

NEXCOM VTC 7230

Intel® Core™ i3-5010U Fanless In-Vehicle Computer

VTC 7230 features powerful new generation Intel® Core™ processor i3-5010U. Its CPU performance gives the users the ability to adapt to what they need in any telematics application. Its powerful graphic engine allows users to fully take advantage of VTC 7230 to achieve smooth, seamless and stunning graphic performance on 3 different video outputs (VGA, DP, LVDS). VTC 7230 is equipped with 2 externally accessible SSD/HDD trays; users can easily download or upload the data on other devices by just removing the storage devices from VTC 7230. By integrating the variety of I/O ports and 4 x mini-PCIe sockets expansibility, VTC 7230 is not only suitable for video surveillance application but also can meet the demand for other telematics applications, such as infotainment, fleet management, and dispatching system.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Intel® Core™ processor dual core i3-5010U
  • Three SIM cards + dual WWAN modules support
  • Dual accessible & hot swappable SATA 3.0 SSD/HDD (RAID 0/1)
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Built-in CAN 2.0B. Optional CAN/OBDII module
  • Wake on RTC/SMS via WWAN module
  • Voice communication via WWAN module
  • 4 x mini-PCIe socket rich expansion capability
Amplicon Middle East-Nexcom-VTC 7230
CPU

Intel® Core™ processor dual core i3-5010U, 2.1GHz
Memory

2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default Industrial grade 2GB
Storage

2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available)
1 x CFast (externally accessible)
Expansion

1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0 + PCIe)
1 x Full size mini-PCIe socket (USB 2.0 + PCIe)
1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning
Built-in G-sensor
I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN
2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available)
1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port
2 x Externally accessible SIM card socket (selectable)
1 x Phone jack 3.5mm for 1 x Mic-In
1 x Phone jack 3.5mm for 1 x Line-out
1 x Externally accessible CFast card socket with cover
1 x Event button (trigger type)
1 x Reset button
3 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 35W typical power consumption
1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each
1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
1 x DP port. Resolution up to 2560 x 1600 @60Hz
2 x DB-9 RS-232
1 x DB-9 RS-232/422/485 (RI/12V selectable)
1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO
1 x 16-pin terminal block
– 1 x CAN Bus 2.0B (on board)
– 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
– 8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC
(Digital Output)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
1 x 12VDC output (2A), SM Bus
4 x antenna hole for WWAN/WLAN/BT/GPS
1 x Fuse (15A)
Power Management

Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Status of ignition and low voltage can be detected by software
Support S3/S4 suspend mode
Operating System

Windows 10
Windows 8, WES8
Windows 7, WES7
Linux (kernel 4.X)
Dimensions

260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13")
Weight

2.5kg
Operating temperatures

-30°C to 55°C (w/ industrial SSD) with air flow
-20°C to 45°C (w/ commercial HDD) with air flow
Storage temperatures

-35°C to 85°C
Relative humidity

10% to 90% (non-condensing)
Vibration

1.5g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD)
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications

CE approval
FCC Class A
E13 Mark

Data Sheet

Download / View