NEXCOM ATC 8110/8110-F

Intel® Coffee Lake S/Refresh + Inference Accelerator AI Powered for Autonomous and Machine Vision

AI has become an essential component of automated vehicle technology. With built-in high-performance Intel® Coffee Lake S/Refresh processing power and the powerful NVIDIA® GeForce® RTX 2080 Ti graphics engine with 4,352 CUDA® cores, ATC 8110 can satisfy a wide variety of applications for Autonomous Vehicle, law enforcement and factory automation fields, like the ANPR, facial recognition, machine vision and self-driving, etc.

Add to WishlistAdd to Compare


  • In-vehicle AI recognition and machine vision applications
  • Fanless/fan flexibility design
  • Up to 8-core Intel® Coffee Lake S/Refresh processing power
  • 3 x PCIe 3.0 slots for Discrete Graphics/Inference/Frame Grabber cards
  • Ultra-fast U.2/M.2 NVMe media for high-speed multi-cameras image capture
  • RAID 0/1/5/10 configurable for data secure and integrity
  • Wide-range 9~36VDC input with Ignition management
  • Rich communication ports, 5 x USB 3.1, 2 x GbE, 4/8 GigE (PoE) and 4 x RS232/422/485
  • Realize M-2-M through CAT-M (NB-IoT & eMTC)
Amplicon Middle East-Nexcom-ATC 8110-8110-F

Intel® Coffee Lake S/Refresh Core™/Xeon® i7/i5/i3/Pentium®/Celeron® processor (LGA1151)



Two 260-pin DDR4 SO-DMIM sockets
Up to 32GB + 32GB in size, 2400/2666 MHz
ECC memory to support: i3-9100E/9100TE, G5400/5400T, G4900/4900T, E-2124G, E-2278GE/2278GEL


Intel® chipset C246

Video Output


3 x 2.5” SATA 3.0 SSD/HDD (15mm height) or 2 x 2.5” SATA 3.0 SSD/HDD+ 1 x U.2 NVMe SSD
1 x CFast (externally accessible)


1 x Full size mPCIe socket (PCIe 2.0 + USB 2.0)
1 x Full size mPCIe socket (USB 2.0 + PCM signal)
1 x M.2 3042/3052 Key B (USB 3.0 + PCM signal) for LTE/5G NR module
Optional 2 x M.2 2280 Key M (PCIe 3.0 x2) for NVMe (GE 74 card pre-installed)
1 x PCIe 3.0 x16 slot for discrete graphics card, up to 321mm in length
2 x PCIe 3.0 x4 slot, up to 190mm in length

GNSS and On-board Sensor

Power over Ethernet


I/O Interface-Front

5-Pin terminal block for 9~36VDC-IN
ATX power button
Reset button
5 x LED indicators for power/IGN/WLAN/WWAN/status
5 x LED indicators for storage/fan control
5 x LED indicators for user to program
1 x USB 3.1 + 1 x USB 2.0, type A
1 x DB15 ((DI/DO + CAN 2.0B + DR signal))
1 x DB15, reserved for expansion
6 x SMA antenna holes
2 x DB9 (RS232/RS422/RS485 selectable)

I/O Interface-Rear

4 x USB 3.1, type A
2 x GbE (RJ45)
1x VGA + 1 x HDMI
2x DB9 (RS232/RS422/RS485 selectable)
12V/2A output
2 x SIM slots
1 x Antenna for GPS
1 x PCIe x16 lane slot
2 x PCIe x4 lane slots

Power Management

Dual 9~36VDC-IN (each for 12V/30A in max.)
Cranking voltage: 6V~9V (< 30 seconds)
Reverse protection, OCP & UVP
Ignition on/off control/programmable on/off delay timer
Extra 12V@2A for DC-out

GPS and Sensor

1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional modules with dead reckoning available
Built-in G-sensor


2-Port independent GbE LAN, RJ45
9K byte jumbo frame
PTP (IEEE 1588) support
Controller: Intel® I210-IT, PHY: Intel® I219LM
vPro (iAMT) & WOL support
Additional 4/8-port independent GbE/PoE PCIe card for option


1 x VGA port, up to 2560 x 1600@60Hz
1 x HDMI v1.4, up to 4096 x 2304@24Hz

DI/DO (isolation)

4-bit input
– Source: 9~36V-IN (12V@1.1mA/24V@2.2mA)
– External: 0~33VDC pull-high, high-level, 3.3 – 33 VDC; low-level, 0 – 2 VDC
4-bit output
– Source: 9~36V-IN (nominal 35mA@24V):
– External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)
Source or external can be selected by software (default: source type)


CAN 2.0B (isolation)

CAN 2.0B (isolation)
Controller: SJA1000
Bit rate up to 1Mbit/s
Socket CAN supported
11-bit & 29-bit identifiers, ISO 11898- 1, ISO 11898-2
ESD: ± 8KV/15KV (contact/air)
2.5KV isolated



Serial Port


Line-out (green-color): unbalance stereo, left & right channel
MIC-in (pink-color)

Operating System


ATC 8110 (fanless): 191.2 x 176 x 350 (W x D x H) (mm)
ATC 8110-F (fan-kit installed): 207.4 x 176 x 350 (W x D x H) (mm)


ATC 8110/ATC 8110-F: 8KG/8.2KG (w/ o graphics/PCIe card)

Operating temperatures

-30°C~60°C (fanless design w/ 35W TDP CPU, 60°C for industrial SSD, 45°C for hard drive)

Storage temperatures


Relative humidity

10%~95% (non-condensing)


IEC 60068-2-64
– 1.0g@5~500Hz (in operating, HDD), 1.6g for HDD w/ damping brackets
– 2.0g@5~500Hz (in operating, SSD + graphics card)
MIL-STD-810G (SSD + graphics card)
– Operating: MIL-STD-810G, 514.6C, Procedure 1, Category 4


Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g


CE approval, FCC Class A, E13

Data Sheet

Download / View