Nexcom-VTC-1031-1031-C2-Amplicon-Middle-East
Nexcom-VTC-1031-1031-C2-Amplicon-Middle-East-1
  1. Nexcom-VTC-1031-1031-C2-Amplicon-Middle-East
  2. Nexcom-VTC-1031-1031-C2-Amplicon-Middle-East-1
  • NEXCOM

NEXCOM VTC 1031/1031-C2

Intel Atom® 6413E Processor Fanless In-Vehicle Computer

VTC 1031 features a next-generation Intel Atom® x6413E processor quad-core 1.5GHz, with powerful graphic and multimedia enhancement. It offers an onboard CAN 2.0B, an optional OBD interface (SAE J1939) for vehicle diagnostics & driver behavior management, an advanced GNSS receiver supporting GPS+QZSS/Glonass/Galileo/Beidou, and an optional dead reckoning. Moreover, for connectivity, it provides WLAN (Wi-Fi 5/6/6E) and WWAN (LTE/5G NR) wireless data.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Intel Atom® x6413E quad-core processor, 9W
  • Compact and fanless design
  • 5G NR and Wi-Fi 6/6E wireless communication options
  • Built-in U-blox M9N GNSS, optional dead reckoning support
  • Built-in 1 x CAN bus 2.0B (optional SAE J1939)
  • Wide range DC input from 9~36V
  • 2 x POE support, total 60W (VTC 1031-C2)
  • 1 x mini-PCIe + 2 x M.2 socket expansions
  • Optional AI accelerator M.2/mPCIe module
Nexcom-VTC-1031-1031-C2-Amplicon-Middle-East
CPU

Intel Atom® x6413E quad-core processor, 1.5GHz, TDP 9W
Memory

1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GB
With In-Band ECC (IBECC)
Video Output

1 x HDMI 1.4b up to 3840 x 2160@30Hz
1 x VGA port 1920 x 1200@60Hz
Storage

1 x 2.5” SATA 3.0 internal drive bay (9.5mm)
1 x M.2 key M 2280 for SATA 3.0
Expansion

1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0)
1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
GNSS and Onboard Sensor

1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou
Optional M8U/M8L modules with dead reckoning available
1 x 3D accelerometer and 3D gyroscope
LAN and Power over Ethernet

1-Port LAN RJ45, 10/100/1000/2500 Mbps Ethernet, Intel® Ethernet Controller I225-IT (support WOL)
1-Port LAN RJ45, 10/100/1000 Mbps Ethernet, Marvell Ethernet PHY 88E1512
2-Port LAN RJ45, 10/100/1000 Mbps Ethernet, PoE 802.3af/at, max 60W (VTC 1031-C2)
Security

TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front

6 x LED indicators (including 1 x programmable LED)
1 x USB 3.2 Gen 2 type A (5V/0.9A)
1 x USB 2.0 type A (5V/0.5A)
1 x Externally accessible micro-SIM card sockets with cover
1 x Reset button
1 x Power button
1 x DB9 (COM) for full RS232/422/485
1 x Mic-in, 1 x Line-out
1 x DB9 for Expansion Port (optional)
2 x RJ45 PoE, including 2 x PoE LED light (VTC 1031-C2)
4 x SMA connector holes for WWAN (VTC 1031)
I/O Interface-Rear

1 x HDMI
1 x VGA
1 x LAN (LAN1) RJ45, 10/100/1000/2500 Mbps
1 x LAN (LAN2) RJ45, 10/100/1000 Mbps
2 x USB 2.0 type A (5V/0.5A)
1 x DB26 (MULTI PORT)
– 1 x Isolated CANBus 2.0B
– 1 x RS232 Tx/ Rx
– 1 x GNSS Speed/Direction
– 5 x DI and 4 x DO
– 2 x RS485
– 12V/ 2A DC output
– GND
1 x 3-pin terminal block for power/ignition input
1 x SMA connector for GNSS
2 x SMA connector holes for WWAN
3 x RP-SMA connector holes for WLAN
Power Management

Power input 9~36VDC
Cranking voltage: 6V~9V (< 30 seconds)
Reverse protection, OCP & UVP
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
10~255 seconds WDT support, setup by software
SDK (Windows/Linux) including utility and sample code
Operating System

Windows 11/Windows 10/Linux
Dimensions

80mm (W) x 180mm (D) x 50mm (H)
Weight

VTC 1031: 1.91kg
VTC 1031-C2: 2.0kg
Operating temperatures

-40°C to 70°C (w/ industrial SSD) with air flow
Storage temperatures

-40°C to 85°C
Relative humidity

90% (non-condensing)
Vibration

Vibration (random)
– 2g@5~500 Hz (in operation, SSD)
Vibration (SSD)
– Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure
– Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity test
Shock

Operating: MIL-STD-810H, Method 516.8, Procedure I, functional
shock=40g
Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Standards/Certifications

CE
UKCA
FCC Class A
E13 mark

Data Sheet

Download / View