7″ WVGA Vehicle Mount Display with Touch Screen and LVDS Interface

VMD 1000 is a 7-inch TFT LCD monitor with 4 wire-resistant touch screen sensors. With the high brightness display and automatic brightness control, it is designed for the in-vehicle application. It also provides USB and card reader features. Those friendly interfaces benefit the technicians during maintenances. Its front panel is compliant with IP54 to meet with industrial applications. VMD 1000 can perfectly match with any VTC series device via the 26-pin LVDS cable.

Add to WishlistAdd to Compare


  • 7" WVGA TFT LCD monitor
  • Automatic/ manual brightness control
  • Remote system power control
  • On screen control buttons
  • Support USB 2.0 and card reader
  • Optional sunlight readable touch support
  • Front panel compliant with IP54
Amplicon Middle East-Nexcom-VMD 1000
LCD Panel

7-inch TFT LCD panel with LED backlight
800 x 480 pixels (WVGA)
Brightness: 500 cd/m² (typical)
Contrast ratio: 600:1 (typical)

Touch Screen Sensor

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 82 ± 3%

I/O Interface-Front

5 x Control buttons
Power on/off
Volume control (+/-)
Brightness control (+/-)
Light sensor
2 x LED indicators
2 x Built-in speakers (1W)

I/O Interface-Lateral

1 x SD/ MMC/ MS Card Reader
1 x USB type A for Storage
1 x Line-out
(switch to external speaker by auto detection)
1 x Mic-in (from external microphone)

I/O Interface-Bottom

Remote System Power On/ Off Button
1 x Mic-out
1 x Line-in
1 x LVDS Connector
(integrating LVDS, USB x 1 and 12Vdc x 1)

Optional Features

Sunlight-readable touch screen
(4 wires resistive w/ anti-glare coating)
Support VESA mount kit


Enclosure: Plastic PC + ABS
Mounting: Support VESA 75, panel and wall mounting
Power Input: 12VDC
Power Consumption: 12W
Ingress Protection: Front panel IP54


182mm (W) x 138mm (H) x 36.3mm (D)
(7.17" x 5.43" x 1.43")


0.45Kg, 0.99Lb

Operating temperatures

-20°C to 70°

Storage temperatures

-30°C to 80°C

Relative humidity


5g@5~500 Hz
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test


Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks andsemi-trailers= 20g
Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment= 75g


CE approval
FCC Class B