10.4″ Rugged Vehicle Mount Computer with Intel Atom® x5-E3930 processor, Touchscreen and IP65

VMC 3020, a 10.4-inch all-in-one robust vehicle mount computer, is designed for the warehouses, logistic and material handling market. It implements the latest Intel Atom® x5-E3930 processor (codename Apollo Lake) and can work on Windows and Linux for different OS. markets. To work well in the special warehouse application, VMC 3020 specially designs powered I/O (up to 12V DC out) to power on the printer, scanner… The backup battery can assist the system without stopping working if the power battery in the forklift suddenly drops down. 1,200 nits brightness is for sunlight readable purpose.

Add to WishlistAdd to Compare


  • 10.4" XGA TFT LCD monitor with 5-wire resistive touch
  • Aluminum die-casting and fanless design
  • Built-in Intel Atom® x5-E3930 processor, 1.8GHz
  • Automatic/manual brightness control
  • On screen F1 ~ F10 programmable function keys
  • Powered USB and COM (5V/12V, 1.5A) for accessories
  • Military standard for vibration and shock
  • UPS battery supported
  • iButton and RFID for ID identification
  • Wide range DC input from 9V ~ 60V DC in
  • Wide range DC input from 9V ~ 60V DC in
  • Sunlight readable capability: 1,200nits LCD brightness
  • CE/FCC/E-Mark
Amplicon Middle East-Nexcom-VMC 3020
LCD Panel

10.4-inch TFT LCD panel with LED backlight
1024 x 768 pixels (XGA)
Brightness: 1200 cd/m² (typical)
Viewing angle: 170° (H):170°(V)
Contrast ratio: 900:1 (typical)

Touch Screen

5-wire resistant touch
Anti-glare coating surface
Transmission rate: 81 ± 3%

CPU & Chipset

Intel Atom® x5-E3930 processor dual core 1.8GHz


One 204-pin DDR3L 1600MHz SO-DIMM slot (default: 4GB)


1 x CFast
1 x 2.5" SATA SSD bay


1 x Half size mini-PCIe socket (USB 2.0, PCIe 2.0)
1 x Full size mini-PCIe socket (USB 2.0) for LTE module with 1 x internal Mini-SIM
1 x M.2 2230 Key E socket (USB 2.0, PCIe 2.0, SDIO 3.0, UART) for Wi-Fi module

I/O Interface-Front

5 x on screen display buttons
Power on/off
Volume control (+/-)
Brightness control (+/-)
Light sensor
4 x LED indicators (power/battery charging, WLAN, shift, storage)
F1 ~ F10 programmable function keys
2 x Built-in 2W speakers

I/O Interface-Lateral

Right Side:
1 x CFast card slot
System reset button
USB 2.0 host type A connector
Left Side:
1 x antenna for WWAN

I/O Interface-Rear/Bottom

1 x Power Switch (ATX mode)
Lockable power connector (power, ignition, ground)
2 x RS232 (full signals, RI, 0V, 5V/1.5A, 12V/1.5A)
1 x DB15
– 1 x Isolated CAN 2.0B
– 1 x iButton
– 1 x RFID (12V/1A. 5V/1A, 4pin)
– 1 x Optional RS232 Tx/Rx (share with GPS UART)
– 2 x GPI
Sink type: 5VDC TTL (default)
Source type: 3 ~ 28VDC
– 2 x GPO
Sink type: 5VDC TTL (default), max current: 20mA
Source type: 3 ~ 28VDC, max current: 150mA
1 x Powered USB (5V/1.5A, 12V/1.5A)
1 x USB Type A (5V/1A)
1 x Mic-in, 1 x Line-out
1 x Antenna for GPS
I/O Interface-Top: 2 x Antenna for Wi-Fi

Power Management

9V~60V DC in (UPS: 12V, 24V, 36V and 48V)
Reverse protection/over voltage protection/under voltage protection
Ignition On/Off control & programmable On/Off delay timing
Wake up by SMS, RTC and ignition

Power Design & Protection

Communication Module

Operating System

Windows 10, Linux


289.98mm(W) x 229.97mm(H) x 68.70mm(D)


3kg, 6.61lb


Cooling system: Fanless
Enclosure: Aluminum die castig
Mounting: VESA 75/100 & desktop mounting
Ingress protection: front panel IP65

Operating temperatures

Ambient with air -30°C to 60°C

Storage temperatures

-30°C to 70°C

Relative humidity

10% to 90% (non-condensing)


Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24


Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and
semi-trailers= 20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground
equipment= 75g


CE/FCC class B/E13

Data Sheet

Download / View