Google Cloud AI Edge In-Vehicle Solution with Intel Atom® E3950

VTC 6222-GCIoT, based on Intel Atom® quad core processor E3950 (up to 2.0GHz), is specifically comply with stringent E mark standard in rugged, fanless and compact mechanism. VTC 6222-GCIoT provides complete communication capability between vehicle and computer with build-in CAN BUS 2.0B interface. Equipped with intelligent power management, VTC 6222-GCIoT can be waked on by ignition, RTC timer or SMS message remotely.

Add to WishlistAdd to Compare


  • Built-in Google Edge TPU ML accelerator coprocessor
  • Intel Atom® processor quad core E3950, up to 2.0GHz
  • 4 x PoE (802.3af/at, max. 60W)
  • Built-in u-blox-M8N GPS
  • Built-in CAN Bus 2.0B
  • Three video outputs, one VGA and two HDMI
  • E Mark conformity
  • 3 x mini-PCIe socket expansion
  • Dual external storage (compatible with 15mm disk)
  • 1 x USB DOM to run OS
  • 1 x SD card for exporting and backing up data
Amplicon Middle East-Nexcom-VTC 6222-GCIoT

Intel Atom® processor quad core E3950, up to 2.0GHz, 12W, 4 core


1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. Default 4GB

Google Edge TPU (Coral ML Accelerator Card)

Hardware interface: mini-PCIe (half size)
Serial interface: PCIe Gen2 x1
Performance: 4TOPS @2Watt
Operating voltage: 3.3V +/- 10 %
Dimensions: 30mm x 26.8mm x 2.5 mm

Video Output

Chipset Intel® HD graphics 505
2 x HDMI 1.4b up to 4096 x 2160 @30Hz
1 x VGA up to 1920 x 1200 @60Hz


2 x 2.5" SSD/HDD SATA 3.0 (compatible with 15mm drive)
1 x SD memory card 3.0 (externally accessible)


1 x Full size mini-PCIe socket (USB 2.0), BOM optional M.2 Key B (USB2.0 + USB 3.0) with 2 x external SIM
1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0)
1 x Half size mini-PCIe socket (USB 2.0 + PCIe 2.0)

GNSS and On-board Sensor

1 x Default U-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou
G Sensor (3-axis, 10-bit resolution)
TPM 2.0 (optional)

Power over Ethernet

4-Port LAN, 10/100/1000 Mbps I210-IT GbE, PoE 802.3af/at, max. 60W
1-Port LAN, 10/100/1000 Mbps I210-IT GbE

I/O Interface-Front

12 x LED indicators (including 3 x programmable LED)
2 x Externally accessible SIM card socket with cover
2 x 2.5" removable SSD tray
1 x Externally accessible SD card socket with cover
1 x Reset button
1 x Power button
1 x USB 3.0 type A (5V/0.9A)
2 x HDMI 1.4b
1 x Mic-in, 1 x Line-out

I/O Interface-Rear

1 x 3-pin terminal block for 9V~48V DC
1 x RJ45 10/100/1000 Mbps
4 x PoE 802.3af/at (max. 60W)
1 x VGA
1 x DB9 full RS-232
4 x SMA antenna
2 x USB 2.0 type A (5V/0.5A)
1 x Line-out
1 x DB15 (DIO)
– 4 x DI with isolation
– 4 x DO with isolation
– Vin, GND for GPIO
– 1 x RS422/RS485
– 1 x RS232 (TX/RX)
– 1 x CAN 2.0B
– 1 x 12VDC, 2A output (Vout, GND)

Power Management

Power input 9~48 VDC
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Support S3/S4 suspend mode
10~255 seconds WDT support, setup by software
SDK (Windows/Linux) including utility and sample code

Rechargeable Battery (option)

Operating System

Debian Linux and other variants


260mm (W) x 196mm (D) x 66.5mm (H)



Operating temperatures

-20°C~60°C (w/ Google Edge TPU & industrial SSD) with air flow

Storage temperatures

-40°C to 80°C

Relative humidity

10% to 90% (non-condensing)


Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure


Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g


FCC Class A
E13 mark

Data Sheet

Download / View