• NEXCOM

NEXCOM MVS 2620-IP

In-Vehicle IP65-rated Box Computer

MVS 2620-IP, an IP65-rated rugged enclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments.

Add to WishlistAdd to Compare

KEY FEATURES:

  • IP65-rated rugged design
  • Intel Atom® x7, 4c, 2.0GHz E3950 (Apollo-lake)
  • 9~36VDC with ignition control
  • Built-in GPS with optional dead reckoning
  • Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
  • Electrical isolation for CAN 2.0B & GPI/O
  • Optional OBD function (SAE J1939/J1708)
  • Rich and various GbE, USB 2.0, serial I/O and storages
  • Compliant to E-mark and ISO 7637-2
  • Compliant to MIL-STD-810G in vibration/shock
Amplicon Middle East-Nexcom-MVS 2620-IP
CPU

Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake)

Memory

204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default

Storage

1 x 2.5" SATA 3.0 SSD/HDD
1 x CFast (externally acessible)

Expansion

GPS and On Board Sensor

1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional modules with Dead Reckoning available
Built-in G-sensor

Ethernet

2-port 10/100/1000 Mbps
Controller: Intel® 1210-T1

Security

TPM in option

I/O Interface-Front

6 x LED indicators for power/storage/WLAN/WWAN/Status/Health
1 x USB type A USB 2.0 port (w/ lid)
1 x SIM slot (w/ lid)
1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector
3 x antenna holes for WWAN/GPS
One expansion port (M12-type) reserved

I/O Interface-Rear

Circular 22-pin:
– 3x RS-232 (two for full, RI/5V/12V selectable)
M12 8-pin:
– 1 x GbE
M12 8-pin:
– 2 x USB 2.0
M12 12-pin:
– 3-bit GPO & 3-bit GPI
– iButton
M12 12-pin:
– 1 x Line-out
– DC12V-out, 2A max.
– OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939)
– 2 x CAN Bus 2.0B from optional VIOB-CAN-04 module
Circular 31-pin:
– 1 x VGA, resolution up to 2560 x 1600 @60Hz
– 1 x GbE
– 2 x RS-485 (2-wire)
– 1 x CAN 2.0B w/ isolation
6-bit DIP switch (w/ lid)
3 x Digital inputs
– Source-type: 9~36V-in (default)
-Eexternal-type: 0~33VDC pull-high
-Isolation
3 x Digital outputs
– Source-type: 9~36V-in (norminal 35mA@24V) (default)
– External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C)
– Isolation
Source or external selected by 6-bit DIP Switch
1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable
4 x antenna holes for WLAN/WWAN
1 x M12 S-code for 9~36VDC-IN

Power Management

Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode

Operating System

Windows 10 64-bit only, Linux YOCTO

Dimensions

260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97")

Weight

2.88kg

Operating temperatures

-30°C~70°C (w/ industrial SSD) with air flow

Storage temperatures

-40°C~80°C

Relative humidity

10% to 90% (non-condensing)

Vibration

1.2g@5~500 Hz (in operation, HDD), 2.5g@5~500 Hz (in operation, SSD)
– Operating: MIL-STD-810G, 514.6C, Category 4
– Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity test

Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Standards/Certifications

CE approval, FCC Class A, E13

Data Sheet

Download / View