Amplicon Middle East-Nexcom-VTC 6210-BK
  • NEXCOM

NEXCOM VTC 6210-BK

Intel® Atom™ E3845 Fanless In-Vehicle Computer

VTC 6210, based on Intel® Core™ quad-core processor E3845 (1.91GHz), is specifically designed for the harsh in-vehicle environment. It allows VTC 6210 to comply with stringent MIL-STD-810G military standards in the rugged, fanless, and compact mechanism. VTC 6210 provides complete communication capability between automotive and computer with a build-in CAN BUS 2.0B interface. Optional OBDII interface (J1939) is also available for vehicle diagnostics. VTC 6210 features rich PAN, WLAN, and WWAN wireless connectivity. With dual SIM cards support, VTC 6210 allows three SIM cards to backup each other for a better connectivity quality by software.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Intel® Atom™ processor quad core E3845, 1.91GHz
  • Three SIM cards + dual WWAN modules support
  • Built-in U-blox M8N GPS, optional dead reckoning support
  • Built-in CAN Bus 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • Wake on RTC/SMS via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe socket expansion
  • Programable 8 x GPIO
  • Voice communication via WWAN module
Amplicon Middle East-Nexcom-VTC 6210-BK
CPU

Intel® Atom™ processor quad core E3845, 1.91GHz
Memory

1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB
Storage

1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available)
1 x CFast (externally accessible)
Expansion

1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0 + PCIe)
1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning
Built-in G-sensor
I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN
2 x Externally accessible SIM card socket (selectable)
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out
1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray
1 x Externally accessible CFast card socket with cover
1 x Event button (trigger type)
1 x Reset button
1 x Type A USB 3.0 compliant host, supporting system boot up
4 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 19W typical power consumption
2 x Type A USB 2.0 compliant host, supporting system boot up
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x DP port, resolution up to 2560 x 1600 @60H
1 x Antenna hole for GPS
2 x DB-9 RS-232 (RI/12V selectable)
1 x DB-9 RS-422/485
1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO
1 x 16-pin terminal block
– 1 x CAN Bus 2.0B (on board)
– 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
– 8 x GPIO (Programmable Digital Input or optional isolation)
Input Voltage (internal type): 5VDC TTL (default)
Input Voltage (source type): 3 ~ 12VDC (Programmable digital input and digital output)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
1 x 12VDC output (2A), SM Bus
Power Management

Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Status of ignition and low voltage can be detected by software
Support S3/S4 suspend mode
Operating System

Windows 8, WES8
Windows 7, WES7
Fedora
Wind River® Intelligent Device Platfrom XT 2.0
Dimensions

260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97")
Weight

2.1kg
Operating temperatures

-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures

-35°C to 85°C
Relative humidity

10% to 90% (non-condensing)
Vibration

1g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD)
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications

CE approval
FCC Class A
E13 Mark

Data Sheet

Download / View