Amplicon Middle East-Nexcom-VTC 1010
  • NEXCOM

NEXCOM VTC 1010

Intel® Atom™ E3827 Fanless In-Vehicle Computer

VTC 1010 features next-generation Intel® Atom™ processor E3827, 1.75GHz, with powerful graphics and multimedia enhancement. VTC 1010 is packed rugged, fanless, and 1 DIN compact enclosure. It is specifically designed to comply with stringent MIL-STD-810G military standards. VTC 1010 comes with a build-in CAN BUS 2.0B interface and optional OBDII (SAE J1939) port to monitor the vehicle operating status in real-time and troubleshoot a non-working vehicle. With dual SIM cards design, it allows the choice of the best service carrier network and minimizes roaming cost.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Intel® Atom™ processor E3827, 1.75GHz
  • Dual SIM cards + dual WWAN modules support
  • Wide operating temperature -30°C ~ 70°C
  • Built-in CAN 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • 4 x mini-PCIe socket rich expansion capability
  • Wake on RTC/SMS via WWAN module
  • Voice communication via WWAN module
  • Compliant with MIL-STD-810G
  • Built-in U-blox M8N GPS, optional dead reckoning support
Amplicon Middle East-Nexcom-VTC 1010
CPU

Intel® Atom™ processor E3827, Dual Core 1.75GHz
Memory

1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB
Storage

1 x 2.5" SATA 2.0
1 x External accessible SD card socket
Expansion

1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0+ PCIe)
1 x Full size mini-PCIe socket (mSATA or PCIe)
1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning
Built-in G-sensor
I/O Interface-Front

8 x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO
2 x External accessible SIM card socket (selectable) with cover
1 x Audio jack 3.5mm for WWAN voice communication, including 1 x Mic-in and 1 x Line-out
1 x External accessible SD card socket with cover
1 x Event button (trigger type)
1 x Reset button
1 x Type A USB 3.0 compliant host, supporting system boot up
I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 11W typical power consumption
1 x Type A USB 2.0 compliant host, supporting system boot up
1 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in (for WWAN voice communication)
1 x Phone jack 3.5mm for 1 x Line-out (for PC audio)
1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
1 x DP port. Resolution up to 2560 x 1600 @60Hz
1 x DB-9 for RS-232
4 x Antenna hole for GPS/WWAN/WLAN/BT
1 x LHF 60-pin connector
1 x 6-pin power connector, 12VDC output (max: 1A)
1 x Type A female USB 2.0 compliant host, supporting system boot up
1 x DB-9 RS-232
1 x DB-9 RS-422/485
1 x DB-9 female 3 x DI and 3 x DO. On board CAN 2.0B signals
(Programmable Digital Input)
Input voltage (Internal Type): 5VDC TTL (default)
Input voltage (Source Type): 3 ~ 12VDC
(Programmable Digital Output)
Digital output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital output (Source Type): 3 ~ 24VDC, max current: 250mA
1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
1 x DB-9 for optional GPS Dead Reckening module
4 x BNC connector Video-In for optional 4-channel video capture card
4 x Audio connector for 7.1 channel audio output (front, center/woofer, rear surround, side surround)
Power Management

Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Status of ignition and low voltage can be detected by software
Support S3/S4 suspend mode
Operating System

Windows 8 Professional, WES8
Windows 7, WES7
Tizen IVI
Fedora
Wind River® Intelligent Device Platfrom XT 2.0
Dimensions

180mm (W) x 180mm (D) x 50mm (H) (7.09" x 7.09" x 1.97")
Weight

1.7kg
Operating temperatures

-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures

-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Relative humidity

10% to 90% (non-condensing)
Vibration

1g@5 ~ 500 Hz (in operation, SSD)
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications

CE approval
FCC Class B
E13 Mark

Data Sheet

Download / View