Intel® Core™ i7 Modular Fanless In-Vehicle Computer

MVS 5600, based on 6th generation Intel® Core™ dual core i7-6600U 2.6GHz and i3-6100U 2.3GHz, is specifically designed for the harsh in-vehicle environment. It allows MVS 5600 to comply with stringent MIL-STD-810G military standard in rugged, fanless and compact mechanism.

Add to WishlistAdd to Compare


  • Modular design for flexible I/O expansion
  • Three SIM cards + dual WWAN modules support
  • Wake on RTC/SMS via WWAN module
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Intel® Core™ dual core i7-6600U/i3-6100U
  • Voice communication via WWAN module
  • iButton for driver ID identification
  • Built-in CAN 2.0B. Optional OBDII function (SAE J1939)
Amplicon Middle East-Nexcom-MVS 5600

6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz


2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory


1 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0, 1 supported (optional lockable storage available)
1 x CFast (externally accessible)


1 x full size Mini-PCIe socket (USB 2.0)
1 x full size Mini-PCIe socket (USB 2.0 + PCIe)
1 x half size Mini-PCIe socket (USB 2.0 + PCIe)

GPS and On Board Sensor

1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional modules with Dead Reckoning available
Built-in G-sensor
Built-in TPM



I/O Interface-Front

6 x LED indicators for power/storage/WLAN/WWAN/Status/Health
1 x CFast socket with cover
1 x Reset button
2 x USB type A USB 3.0 port
2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
2 x externally accessible SIM card sockets (selectable)
2 x antenna holes for WWAN/WLAN/BT/GPS

I/O Interface-Rear

2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED
1 x 9~36VDC input with ignition and 34W typical power consumption
2 x USB type A USB 3.0 port
2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x HDMI port, resolution up to 2560 x 1600 @60Hz
2 x DB-9 RS-232
1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)
1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button
1 x 16-pin terminal block connector
– 1 x CAN Bus 2.0B (on board)
– 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)
– 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
– 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton
– 8 x programmable GPIO
(4 x Digital inputs, w/ optional 3KV isolation protection)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~24VDC
(4 x Digital outputs, w/ optional 3KV isolation protection)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA

Power Management

Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode
Optional internal 1100mAh, Li-Polymer rechargeable battery

Operating System

Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X


260mm (W) x 196mm (D) x 66.5mm (H) (10.24" x 7.72" x 2.62")



Operating temperatures

-30°C~60°C (w/ industrial SSD) with air flow

Storage temperatures


Relative humidity

10% to 90% (non-condensing)


1.2g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)
– Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
– Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test


Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g


CE approval, FCC Class A, E13 Mark

Data Sheet

Download / View