Nexcom-VTC-7270-C4-C8-Amplicon-Middle-East
  1. Nexcom-VTC-7270-C4-C8-Amplicon-Middle-East
  2. Nexcom-VTC-7270-C4-C8-Amplicon-Middle-East-1
  • NEXCOM

NEXCOM VTC 7270-C4/C8

Fanless AI Powered Vehicle Computer with 12/13th Gen Intel® Core™ CPU

The VTC 7270-C4/C8 is an in-vehicle telematics computer equipped with a 12/13th Gen Intel® Core™ processor, offering 30% more computing power than its predecessor. It is a suitable option for various in-vehicle applications to reduce maintenance costs, including fleet management, logistics/AMR, ITS, constructions, ANPR, and security surveillance.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Powered by 12/13th Gen Intel® Core™ i with DDR5, excellent memory bandwidth, lower latency
  • Rich I/Os, 4/8 x 2.5GbE PoE+, 1 x GbE, 6 x USB 3.2, 2 x CAN FD & 4 x Serials
  • Up to 4 WWAN/WLAN combinations for mobile router applications
  • 2 x 2.5” SSD, 1 x NVMe ultra-speed SSD for data integrity
  • Up to two Hailo AI accelerator (26TOPS workload each) as optional
  • 9~36V DC-IN with ignition control & OCP/OVP
  • Wide range operating temperature of -35°C~65°C (fanless@35W CPU)
  • CE/FCC, UKCA, Emark Certified
Nexcom-VTC-7270-C4-C8-Amplicon-Middle-East
CPU

12/13th Gen Intel® Core™ i, Intel® R680E chipset
Graphics:
– Intel® UHD graphics 770, 1.55GHz
– Max resolution: 4096 x 2160@60Hz (HDMI)
– DirectX: 12, openGL: 4.5
Memory

2 x SO-DIMM, DDR5-4800MHz
ECC & dual-channel support
Storage

2 x 2.5” SSD (15mm height, removable)
1 x M.2 2280 Key M (PCIe4.0 x4), NVMe in default, Hailo card in option
Expansion

1 x mPCIe slot (PCIe 3.0, SATA 3.0, USB 2.0), Wi-Fi in default, optional for mSATA module
1 x mPCIe slot (USB 3.2, PCIe 3.0, SATA 3.0), SIMs support, LTE (default), Wi-Fi/mSATA in option by DIP S/W setting
1 x M.2 3042/50/52 Key B socket (USB 3.2/2.0), SIMs support for LTE/5G modem
1 x M.2 3030 Key E socket (PCIe 3.0×2 & USB 2.0), Wi-Fi (default), Hailo card (option)
Display

1 x HDMI 2.0a/b, up to 3840×2160@60Hz
1 x VGA, up to 1920×1200@60Hz; 1 x DP, 4096×2304@60Hz
2.5GbE PoE+

4-port independent 2.5GbE, RJ45 connector
– IEEE 802.3af/at, total 60W
– 9Kbyte Jumbo frame
– PTP (IEEE 1588) support
– Controller: Intel® I226-IT
Additional 4-port 2.5GbE PoE, 60W, VTC 7270-C8
GbE/MGT

1-port independent GbE, RJ45 connector
– vPro (iAMT) support (option)
– 9KB Jumbo frame
– PTP (IEEE 1588) support
– Wake-up function (WoL)
– Boot from PXE (Legacy & UEFI)
USB

6 x USB 3.2 Gen 2:
– Host Type-A connector
– 5V@900mA each
– Up to10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed)
Serial Port

2 x Full RS232/422/485
2 x Full RS232
RS232 working voltage, +- 9V, baud rate up to 115.2kb/s
2-wire/4-wire RS-485 (Baud rate: 300~115.2Kbps)
Security

TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
Audio & DC-OUT

Line-out, unbalance stereo, left & right channel
Line-in & MIC-in, stereo
DC-OUT: 12VDC@2A
MEMS Sensor

3D accelerometer and 3D gyroscope, ST LSM6DSLTR
DI/DO

4-bit input
– Source: 9~36VDC (12V@1.1mA/24V@2.2mA)
– External: 0~33VDC pull-high, high/low level 3.3 – 33/ 0 – 2 VDC
4-bit output
Source: 9~36VDC (nominal 35mA@24V)
– External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)
Source or external can be selected by DIP S/W (default: source type)
CAN Bus

2 x CAN FD, compatible with CAN2.0A/2.0B
Up to 5Mb/s in data transmit, 2.5KV isolated
IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/air)
GNSS

u-blox NEO-M9N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional DR (Dead Reckoning) function, M9V/M8L
Power Supply

Nominal voltage: 9~36V
Cranking voltage: 6V~9V (less than 20 sec)
OCP & UVP (shut down once exceeding 37V)
Ignition on/off control & programmable on/off delay timer
Optional for remote power on/off control
I/O Ports, Front-Plate

ATX power & reset button
9 x LED Indicators
4 x Nano SIM slots (SIM1-1, SIM1-2, SIM2-1, SIM2-2)
2 x USB 3.2 Type A
1 x HDMI, 1 x DP
Fan power connector
4 x 2.5GbE PoE (RJ45), 1 x GbE (RJ45)
2 x Removable 2.5” SSD bay
1 x Multi-port DB15 (4 x DI, 4 x DO, 2 x CAN FD)
1 x PR-SMA for GNSS, 2/4 x SMA for LTE/5G ant.
I/O Ports, Rear-Plate

2 x RS232 (DB9), 2 x RS232/422/485 (DB9)
4 x USB 3.2 type A
Audio jack for Line-in, Line-out, MIC-in
1 x VGA
5-pin Phoenix for 9~36VDC-in
1 x Mini-fit connector (DR signal & DC-OUT)
2/4 x PR-SMA for Wi-Fi ant.
4 x 2.5GbE PoE (RJ45) with LED Indicators (VTC 7270-C8)
Dimensions

260.0mm x 210.0mm x 81.0mm (w/o mount bracket)
293.0mm x 210mm x 90.0mm (w/ mount bracket)
Weight

5.7kg, 6.8kg (w/ fan kit)
Operating temperatures

-35°C~60°C/65°C (35W CPU, fanless, 120W/60W PoE)
-35°C~60°C/65°C (65W CPU, w/ fan, 120W/60W PoE)
Storage temperatures

-40°C~85°C
Relative humidity

10%~95% (non-condensing)
Vibration

Vibration in operating:
– MIL-STD-810H, 514.8C Procedure 6, Category 4
– IEC 60068-2-64: 2.0g@5~500 Hz Vibration in storage:
– MIL-STD-810H, 514.8E Procedure 1, Category 24, 7.7g
Shock

MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g
Crash hazard: Procedure V, ground equipment=75g
Standards/Certifications

CE approval, FCC Class A, UKCA, E13 Certified
Operating System

Windows 10 64-bit/ Windows 10 IOT 64-bit, Windows 11
Linux (Ubuntu 18.04)

Data Sheet

Download / View