Intel® Atom™ E3845 Fanless In-Vehicle Computer with 4-Channel Video Inputs

VTC 6210-VR4, based on Intel® Core™ quad-core processor E3845 (1.91GHz), is specifically designed for the harsh in-vehicle environment. It allows VTC 6210-VR4 to comply with stringent MIL-STD-810G military standards in rugged, fanless, and compact mechanisms. VTC 6210-VR4 provides complete communication capability between automotive and computer with build-in CAN BUS 2.0B interface. Optional OBDII interface (J1939) is also available for vehicle diagnostics. VTC 6210-VR4 features rich PAN, WLAN, and WWAN wireless connectivity.

Add to WishlistAdd to Compare


  • Support 4-channel video inputs
  • Three SIM cards + dual WWAN modules support
  • Built-in U-blox M8N GPS, optional dead reckoning support
  • Built-in CAN Bus 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • Wake on RTC/SMS via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe socket expansion
  • Programable 8 x GPIO
  • Voice communication via WWAN module
Amplicon Middle East-Nexcom-VTC 6210-VR4

Intel® Atom™ processor quad core E3845, 1.91GHz


1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB


1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available)
1 x CFast (externally accessible)


1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0)
1 x Full size mini-PCIe socket (USB 2.0 + PCIe) + video capture card
1 x Half size mini-PCIe socket (USB 2.0 + PCIe)

GNSS Function

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/ Beidou) or optional module with Dead Reckoning
Built-in G-sensor

I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN
2 x Externally accessible SIM card socket (selectable)
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out
1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray
1 x Externally accessible CFast card socket with cover
1 x Event button (trigger type)
1 x Reset button
1 x Type A USB 3.0 compliant host, supporting system boot up
4 x Antenna hole for WWAN/WLAN/BT

I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 19W typical power consumption
2 x Type A USB 2.0 compliant host, supporting system boot up
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x DP port, resolution up to 2560 x 1600 @60H
1 x Antenna hole for GPS
1 x DB-9 RS-232 (RI/12V selectable)
1 x DB-9 RS-422/485
1 x DB15 connector for 4-channel video inputs
1 x 16-pin terminal block
– 1 x CAN Bus 2.0B (on board)
– 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
– 8 x GPIO (Programmable digital input and digital output)

Input Voltage (internal type): 5VDC TTL (default)
Input Voltage (source type): 3 ~ 12VDC (Programmable Digital output or optional isolation)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
1 x 12VDC output (2A), SM Bus

Power Management

Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Status of ignition and low voltage can be detected by software
Support S3/S4 suspend mode

Operating System

Windows 8, WES8
Windows 7, WES8

Video Input Function

4-channel analog NTSC/PAL video input
4-channel stereo audio input
Recording video format: MPEG4/H.264 (Software Compression)
Video resolution: Max D1 (NTSC: 720 x 480@30fps; PAL: 720 x 576@25fps)


260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97")



Operating temperatures

-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow

Storage temperatures

-35°C to 85°C

Relative humidity

10% to 90% (non-condensing)


1g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD)
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test


Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g


CE approval
FCC Class A
E13 Mark

Data Sheet

Download / View