Amplicon Middle East-Nexcom-VMD 2000
  • NEXCOM

NEXCOM VMD 2000

8″ SVGA Vehicle Mount Display with Touch Screen and LVDS Interface

VMD 2000 is an 8-inch TFT LCD monitor with 4 wire-resistant touch screen sensors. With the high brightness display and automatic brightness control, it is designed for in-vehicle applications. It also provides USB and card reader features. Those friendly interfaces benefit the technicians during maintenances. Its front panel is compliant with IP54 to meet with industrial applications. VMD 2000 can perfectly match with any VTC series device via the 26-pin LVDS cable.

Add to WishlistAdd to Compare

KEY FEATURES:

  • 8" SVGA TFT LCD monitor
  • Automatic/ Manual brightness control
  • Remote system power control
  • On screen control buttons
  • Support USB 2.0 and card reader
  • Sunlight readable solution with 800cd/m2 high brightness support
  • Front panel compliant with IP54
Amplicon Middle East-Nexcom-VMD 2000
LCD Panel

8-inch TFT LCD panel with LED backlight
800 x 600 pixels (SVGA)
Brightness: 500 cd/m² (typical)
Optional high brightness for sunlight-readable with 800cd/m2
After touch screen is 640cd/m2
Contrast ratio: 500:1 (typical)
Touch Screen Sensor

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 82 ± 3%
I/O Interface-Front

On screen display buttons x 5
Power on/off
Brightness control (+/-)
Volume control (+/-)
Light sensor
2 x LED indicators
2 x Built-in speakers (1.2W)
I/O Interface-Lateral

1 x SD/ MMC/ MS card reader
1 x USB type A Host
1 x Line-out (automatic detection/ switch to external speaker)
1 x Mic-in
I/O Interface-Bottom

Remote System Power On/ Off Button
1 x Mic-out
1 x Line-in
1 x LVDS Connector
(integrating LVDS, USB x 1 and 12Vdc x 1)
Optional Features

Sunlight-Readable Display with High Brightness LCD (800 cd/m2)
Support Panel and wall mount kit
General

Enclosure: Plastic PC + ABS
Mounting: Support VESA 75, panel and wall mounting
Power Input: 12VDC
Power Consumption: 15W
Ingress Protection: Front panel IP54
Dimensions

207mm (W) x 173mm (H) x 36.7mm (D)
(8.15" x 6.81" x 1.44")
Weight

0.7Kg, 1.54Lb
Operating temperatures

-20°C to 60°C
Storage temperatures

-30°C to 70°C
Relative humidity

–
Vibration

2.5g@5~500 Hz
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock

Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers= 20g
Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment= 75g
Standards/Certifications

CE approval
FCC Class B

Data Sheet

Download / View