• NEXCOM

NEXCOM MVS 5603-C6SMK

6-CH PoE In-vehicle Mobile Computer

MVS 5603-C6SMK 6-CH PoE In-vehicle mobile computer increases safety and security for bus passenger transportation with high video resolution and 2 removable extensive HDD/SSD and CFast for storage capacity. It connects up to 6 IP cameras + PoE function providing reliable and high quality video coverage around the bus.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Modular design for flexible I/O expansion
  • WLAN, 3G/LTE via 3 mini-PCIe + 1 M.2 slots
  • Up to five SIM cards + triple WWAN modules support
  • 6 x GbE 802.3 af/at PoE, 6 x M12 ports
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Intel® Core™ dual core i7-6600U/i3-6100U Dual removable SATA 3.0 2.5" SSD/HDD
  • iButton for driver ID identification
  • Built-in CAN 2.0B. Optional OBDII function (SAE J1939/J1708)
  • Pattern number M531607 registered, an easy way to expand diverse I/O cards
Amplicon Middle East-Nexcom-MVS 5603-C6SMK
CPU

6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz

Memory

2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory

Storage

2 x 2.5” SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0, 1 supported (optional lockable storage available)
1 x CFast (externally accessible)

Expansion

1 x full size mini-PCIe socket (USB 2.0)
1 x full size mini-PCIe socket (USB 2.0 + PCIe)
1 x half size mini-PCIe socket (USB 2.0 + PCIe)
1 x M.2 B-key (3042)
1 x full size mini-PCIe socket (USB 2.0)

GPS and On Board Sensor

1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional modules with Dead Reckoning available
Built-in G-senso

POE

6-port M12 for 10/100/1000 Mbps PoE IEEE 802.3af/at conformity, total 60W PSE

Ethernet

Security

TPM in option

I/O Interface-Front

6 x LED indicators for power/storage/WLAN/WWAN/Status/Health
1 x Reset button
2 x USB type A USB3.0 port
2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
1 x externally accessible SIM card socket
2 x antenna holes for WWAN/WLAN/BT/GPS

I/O Interface-Rear

6 x M12 10/100/1000 Mbps PoE ports with LED
2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED
1 x 9~36VDC input with ignition and 40W typical power consumption
2 x USB type A USB 3.0 port
2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x HDMI port, resolution up to 2560 x 1600 @60Hz
2 x DB-9 RS-232
1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)
1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button
1 x DB9 connector for optional DR signal input, 2 x MDO and iButton
1 x 16-pin terminal block connector
1 x CAN Bus 2.0B (on board)
1 x OBDII from optional VIOB-CAN-03 module (SAE J1939)
1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
8 x programmable GPIO
(4 x Digital inputs in default)
-Input voltage (source type): 5VDC TTL (default)
-Input voltage (external type): 3 ~ 12VDC
(4 x Digital outputs in default)
-Digital output (source type): 5VDC TTL (default), max current: 20mA
-Digital output (external type): 3 ~ 24VDC, max current: 150mA
1 x externally acessible SIM card socket and 1x internal SIM card socket selectable

Power Management

Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode

Rechargeable Battery (option)

Lithium-ion Polymer
Nominal capacity 1100mAh
Maximum charge current 1.0CmA

Operating System

Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X

Dimensions

260mm (W) x 196mm (D) x 91mm (H) (10.24” x 7.72” x 3.58”)

Weight

4kg

Operating temperatures

-30°C~60°C (w/ industrial SSD) with air flow

Storage temperatures

-40°C~80°C

Relative humidity

10% to 90% (non-condensing)

Vibration

1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)
Operating: MIL-STD-810G, Method 514.6C, Procedure 1, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6E, Procedure 1, Category 24, minimum integrity test

Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g (HDD); functional shock=40g (SSD)
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Standards/Certifications

CE approval, FCC Class A, E13 Mark

Data Sheet

Download / View