ATC 3750-IP7-8M
NEXCOM ATC 3750-IP7-8M
ATC 3750-IP7-8M
  1. 2a2bafa3-9f5e-4bd9-9e3c-2527e4c909ca
  2. Amplicon-Middle-East-Nexcom-ATC-
  3. Amplicon-Middle-East-Nexcom-ATC- (1)
  • NEXCOM

NEXCOM ATC 3750-IP7-8M

ATC 3750-IP7-8M

NVIDIA® Jetson AGX Orin™ Solution Performance Edge AI Computing for Rail

  • Built-in NVIDIA® Jetson AGX Orin™ SOM, up to 200/275 TOPS (INT8) performance
  • Designed to be IP67 rated, rugged, and compact
  • 8 MIPI/GMSL2 & 2.5GbE (X-coded) for MIPI CAM/IP CAM/LiDAR sensors
  • HEVC/H.265 hardware DECODE, supporting up to 7 x 4K30
  • Wide range operating temperature of -25°C~70°C
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity
  • Expansible for GNSS, LTE/5G NR & Wi-Fi 5/6
  • 9~36VDC & 24V rail combined, ignition control & OCP/OVP
  • NEXCOM Acceleration Linux (NAL) integrated w/ JetPack 6.0
  • Military standard of MIL-STD-810H for anti-vibration/shock
  • CE/FCC, UKCA, E-mark, EN50155 (EN55011, EN50121-3-2, EN61373, OT3) certified
Add to WishlistAdd to Compare

KEY FEATURES:

  • Built-in NVIDIA® Jetson AGX Orin™ SOM, up to 200/275 TOPS (INT8) performance
  • Designed to be IP67 rated, rugged, and compact
  • 8 MIPI/GMSL2 & 2.5GbE (X-coded) for MIPI CAM/IP CAM/LiDAR sensors
  • HEVC/H.265 hardware DECODE, supporting up to 7 x 4K30
  • Wide range operating temperature of -25°C~70°C
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity
  • Expansible for GNSS, LTE/5G NR & Wi-Fi 5/6
  • 9~36VDC & 24V rail combined, ignition control & OCP/OVP
  • NEXCOM Acceleration Linux (NAL) integrated w/ JetPack 6.0
  • Military standard of MIL-STD-810H for anti-vibration/shock
  • CE/FCC, UKCA, E-mark, EN50155 (EN55011, EN50121-3-2, EN61373, OT3) certified
ATC 3750-IP7-8M
NVIDIA® Jetson AGX Orin™ SOM

32GB 256-bit LPDDR5, 204.8 GB/s
– 8 x cores, 2 Cortex-A78AE CPU clusters (4 cores/cluster), 2.2 GHz
– 1792 CUDA® cores, 56 Tensor cores, 108 Sparse TOPS, 939 MHz
– 200 INT8 Sparse TOPS
– 2 x NVDLA v2.0 engines: 1.4 GHz, 46 TOPS each (Sparse INT8)
64 GB 256-bit LPDDR5, 204.8 GB/s
– 12 x cores, 3 Cortex-A78AE CPU clusters (4 cores/cluster), 2.2 GHz
– 2048 CUDA® cores, 64 Tensor cores, 170 Sparse TOPS, 1.3 GHz
– 275 INT8 Sparse TOPS
– 2 x NVDLA v2.0 engines: 1.6 GHz, 52.5 TOPS each (Sparse INT8)
Video Encode: 2 x 4K60, 4 x 4K30, 8 x 1080p60 (H.265)
Video Decode: 1 x 8K30, 3 x 4K60, 6 x 4K30, 12 x 1080p60 (H.265)
OpenGL 4.6+, OpenGL ES 3.2, and Vulkan 1.2+, CUDA 10.2+
NVIDIA® JetPack 6.0
Storage

64GB eMMC 5.1 flash storage, 200 MHz (HS400 or HS533)
1 x Accessible SD card (SDXC-I/ UHS-I, SD3.0)
1 x M.2 2280 Key M (PCIe4.0 x4), NVMe SSD
Expansion

1 x Full size mPCIe socket (PCIe 4.0, USB 2.0)
1 x M.2 3042/3052 Key B socket (USB 3.2/2.0), 2 x Nano SIM slots
1 x M.2 3030 Key E socket (PCIe4.0, USB2.0) for Wi-Fi 5/6
Display

1 x HDMI 2.0A/B, up to 3840 x 2160@60Hz
G-Sensor

3D accelerometer and 3D gyroscope, ST LSM6DSLTR
MIPI/GMSL2

8 MIPI SerDes/GMSL2 ports
Controller:Maxim MAX96712
Camera supported for e-con systems:
– STURDeCAM21
– STURDeCAM25
– STURDeCAM31
PoC (Power over Cable)
External cable length: 15 meters
Connector: FAKRA Z-coded
Multi-Gigabit

– 1-port GbE, 1-port 2.5GbE
– 9Kbyte Jumbo frame
– IEEE1588 supported
– LAN controller: Intel I226-I
– X-coded connector
USB

2 x USB 3.2 Gen 2:
– Host Type-A connector
– 5V@900mA each
– Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed)
2 x USB2.0
1 x OTG, micro USB
Serial Port

1 x RS232 (Tx, Rx, RTS, CTS, DTR, DSR)/RS422/RS485
1 x RS232(Tx, Rx, RTS, CTS)
1 x Console (Tx, Rx)
RS232 working voltage, +- 9V, baud rate up to 115.2kb/s
DI/DO

4-bit input
Source: 9~36VDC (12V@1.1mA/24V@2.2mA)
– External: 0~33VDC pull-high, high-level, 3.3 – 33 VDC; low-level, 0 – 2 VDC
4-bit output
– Source: 9~36VDC (nominal 35mA@24V)
– External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)
Source or external can be selected by software (default: source type)
CANBus

2 x CAN FD, compatible with CAN2.0A/2.0B
IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV/15KV (contact/air)
Up to 5Mb/s in data transmit, 2.5KV isolated
Watch Dog Timer

Yes, through MCU
Remote ATX PWR & Reset Trigger

Reserved, wafer-type
GNSS

u-blox NEO-M9N GNSS module (VIOB-GPS-07) for GPS/Gloness/QZSS/Galileo/Beidou
Optional DR (Dead Reckoning) function
I/O Ports, Rear-Plate

COM1/COM2 (M12 A-coded)
MULTI (CAN FD, DI/DO, DR, GPS/PPS, M12 A-coded)
2 x USB2.0 (M12, A-coded)
GbE (M12, X-coded)
2.5GbE (M12, X-coded)
8 MIPI/GMSL2 (FAKRA Z-coded)
2 x RP-SMA for Wi-Fi
4 x SMA for LTE/5G
9~36V/24V rail DC-IN, K-coded
Dimensions & Weight

260.0mm x 155.0mm x 66.5mm (w/o mount bracket), weight: 3.5kgOperating temperatures: -25°C~70°C (TDP 15W~60W, fanless Storage temperatures: -40°C~85°C
Relative humidity: 10%~95% (non-condensing)
Environment

Operating temperatures: -25°C~70°C (TDP 15W~60W, fanless Storage temperatures: -40°C~85°C
Relative humidity: 10%~95% (non-condensing)
Vibration & Shock

Vibration in operating:
– MIL-STD-810H, 514.8C Procedure 6, Category 4
– IEC 60068-2-64: 2.0g@5~500 Hz
Vibration in storage:
– MIL-STD-810G, 514.6E Procedure 1, Category 24, 7.7g
Shock:
– MIL-STD-810G, 516.6 Procedure I, trucks and semi-trailers=40g
– Crash hazard: Procedure V, ground equipment=75g
Certifications

CE approval, FCC Class A, UKCA, E13, and EN50155 certified
Operating System

NEXCOM Aided Linux (NAL) w/ Jetpack 6.0 integrated
NEXCOM custom functions (GNSS, 5G/NR, 6-axis sensor, MCU control)
Ubuntu 22.04 (L4T 36.3, Linux Kernel 5.15)
External Cable (optional)

MULTI adapter cable, 20cm
M12 adapter cable to COM1/COM2, 20cm
M12 adapter cable to 2 USB2.0, 20cm
X-coded adapter cable to 1/2.5GbE, 20cm

Data Sheet

Download / View