Amplicon Middle East-AMPLICON-LIVELINE-Impact-S-4416
  • AMPLICON LIVELINE

AMPLICON LIVELINE Impact-S 4416

Impact-S 4416 – Xeon v4 (Sgl/Dual) Intel® CPU (10C/20T), 16GB DDR4 ECC 2400MHz 16 SATA HDD, BaseKit Iss C

The Amplicon Impact-S 4000 Storage server series provides scalable high storage and processing capability to meet the requirements of professional IP CCTV / IP surveillance applications. The unit uses the highest grade components including industrial grade power supplies and enterprise-class HDDs to deliver a very high-reliability IP CCTV recording platform. The system comprises up to 16 x xTB hard drives. This server has been tested with several IP Surveillance software packages including Milestone. Amplicon is a Milestone Solution Partner providing storage servers for IP CCTV applications.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Specifically designed for use with large IP camera networks
  • IPMI (Intelligent Platform Management Interface) allows easy remote access
  • RAID Hot Spare feature can automatically replace faulty hard drives
  • Industrial grade redundant power supplies
  • Designed, built & supported in the UK
  • Custom solutions available for OEMs & system integrators
Amplicon Middle East-AMPLICON-LIVELINE-Impact-S-4416
CPU

Intel® Xeon™ E5-2630v4 2.2GHz 25MB cache (will house dual CPU)
Chipset

Intel® C612
Main memory

Up to 1TB ECC DDR4 2400MHz (8-slots)
Video

ASPEED AST2400 BMC
LAN

Dual Intel® i210, RTL8211E IPMI
Disk Capacity

16 x 3.5" RAID Edition drives
Configured as RAID 0, 1, 5, 10, 50, JBOD
System Expansion

3 PCI-E 3.0 x8
1 PCI-E 3.0 x16
1 PCI-E 3.0 x4 (in x8)
1 PCI-E 2.0 x4 (in x8)
Supported Operating System

Microsoft Server 2012R2, Server 2016. RHEL
LEDs and switches

Front:
Power (PC ON) LED
Hard disk access LED
LAN activity x 2
Drive caddy HDD activity and power LED x 16
System monitor x 2 LED and single alarm reset switch
ATX system control switch, system reset
Rear:
System ON/OFF power switch x 3 (x 1 per module)
External interfaces

2 x RJ45 Dual GbE
1 x RJ45 IPMI
1 x VGA
2 x USB 3.0 Type-A, 2 x USB 2.0 Type-A
1 x DB9 Serial
Electrical Ratings

Industrial N+1 redundant design power supply
Voltage: 90 ~ 264 VAC full range
Frequency: 47 ~ 63Hz
Inrush current: 40A / 60A (115 / 230VAC)
PSU maximum secondary loading: 800W
Active PFC
EMI noise filter
Over power/voltage/current protection
Short circuit protection
Electromagnetic Compatibility (EMC)

EN55032 Class A
EN55024 Industrial severity (where applicable)
Electrostatic discharge immunity test (EN61000-4-2)
±4kV Contact, applied to enclosure port
±8kV Air, applied to enclosure port
±4kV Indirect, applied to coupling plane
Radiated, radio-frequency, electromagnetic field immunity test (EN61000-4-3)
80-1000MHz, 10 V/m (RMS, no modulation)
80% Modulation with 1kHz Sine wave
Electrical fast transient/burst immunity test (EN61000-4-4)
Power port AC, inc. protective earth
Severity ±1kV
Surge Immunity test (EN61000-4-5)
Power port AC
Severity ±1kV applied line to line
Severity ±2kV applied line to earth
Immunity to conducted disturbances induced by radio frequency fields
(EN61000-4-6)
Power port AC, inc. protective earth via CDN M3
0.15-80MHz, 10 V/m (no modulation) 80% Modulation with 1kHz Sine wave,
applied via CDN type M3
Voltage dips, short interrupts and voltages variations immunity tests
>95% Reduction, 0.5 Periods
>30% Reduction, 25 Periods
>95% Reduction, 250 Periods
Voltage dips, short interrupts and voltages variations immunity tests (EN61000-6-2)
Power port AC
>30% Reduction, 0.5 Periods
>60% Reduction, 25 Periods
>100% Reduction, 250 Periods
Limits for harmonic current measurement (EN 61000-3-2), Product Class D
Limitation of voltage changes, voltage fluctuations and flicker (EN 61000-3-3)
Mechanical

Design: EIA RS-310C 19" Rackmount Standard
Construction: Heavy duty cold rolled electroplated steel
Colour: Black (custom colours available for large orders)
Packaging size: 854 (W) x 336 (H) x 576 (D) mm (33.6" x 13.2" x 22.7")
Total drive capacity: 1 x Slim DROM, 2 x .5” internal, 1 x 2.5” Slim FDD,
16 x 3.5” hot-swap SATA bays
Cooling : Industrial fans 3 x 120mm (90 CFM each) mid-chassis, 2 x 60mm
(23.5CFM) rear
Dimensions

483 (W) x 177 (H) x 650 (D) mm (19.0” x 7.0” x 25.6”)
weight

approximately 40kg (fully populated)
Operating Temperature

0 to 45°C (tested for extended operation up to 50°C)
Storage Temperature

-20 to 65°C
Relative Humidity

5 to 90% at 25°C non-condensing
Safety

Safety of information technology equipment (EN 60950)
CE Marked