• NEXCOM

NEXCOM VMC 220

8″ Rugged Vehicle Mount Computer with NXP i.MX 8M Quad Processor, Projected Capacitive Touch Screen, and IP65

VMC 220, 8-inch all in one robust vehicle mount computer, is designed for the warehouses, port, logistic and material handling markets. It implements the NXP i.MX 8M Quad low-power processor on Linux platform, and offers complete IP65 and IK08. VMC 220 is able to support an analog camera x 4 for security purposes and takes less than 1 second to see video content. The optional backup battery can help to back up data when the car power battery stops supplying. LCD panel: 1,000nits type. guarantees to reach sunlight-readable. Wide-range power input (9V~60V) can let VMC 220 be capable of setting up in various facilities and vehicles. The M.2 slot x 2 is designed for WLAN and WWAN wireless connectivity.

Add to WishlistAdd to Compare

KEY FEATURES:

  • Built-in NXP i.MX 8M Quad low-power processor, up to 1.3 GHz
  • 8" TFT LCD monitor with projected capacitive touch screen
  • IPS LCD with wide viewing angle and resolution 1280 x 720
  • Touch panel cover thickness 3mm for IK08 protection
  • Sunlight readable capability: 1,000nits LCD brightness
  • CVBS input for analog camera x 4
  • Isolated CANBus 2.0 x 1
  • Back-up battery for approx. 20 min of operation (optional)
  • Wide range DC input from 9V ~ 60V DC in
  • Complete IP65 waterproof
  • Touchscreen is operable with various gloves (even with water spillage)
Amplicon Middle East-Nexcom-VMC 220
LCD Panel

8-inch TFT LCD panel with LED backlight
1280 x 720 pixels (HD)
Brightness: 1000 cd/m² (typical)
Viewing angle: 170° (H)/170°(V)
Contrast ratio: 1000:1 (typical)

Touch Screen

Projected capacitive
Anti-glare coating surface
Transmission rate: 80 ± 3%

CPU & Chipset

NXP i.MX 8M Quad processor with 1.3 GHz frequency
Quad Arm® Cortex®-A53 core

Memory

Onboard LPDDR4 2400MHz SDRAM 4GB

Storage

1 x eMMC 32GB (BOM optional 64GB)
1 x Micro SDXC Slot

Expansion

1 x M.2 2230 Key E socket (SDIO 3.0, PCIe 2.0, UART)
1 x M.2 3042/3050/3052 Key B socket (USB 3.0) for LTE/5G NR module with 1 x external Micro-SIM slot, with 1 x internal Micro-SIM slot

GNSS and Onboard Sensor

1 x Default u-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou
Optional M8U/M8L modules with dead reckoning available
G Sensor and gyroscope

LAN

1-port LAN, 10/100/1000 Mbps

Security

TPM 2.0: Infineon SLB9665TT2.0FW5.62 (BOM optional)

I/O Interface-Front

Volume control keys (+/-) with LED
Brightness control keys (+/-) with LED
F1 ~ F4 programmable function keys with LED
1 x Shift key with LED
Light sensor
5 x LED indicators (power, battery, WWAN, WLAN, storage)
2 x Built-in 2W speakers
1 x Mic

I/O Interface-Lateral

Left Side
– 1 x System reset button w/ cover
– 1 x MicroSD slot w/ cover
– 1 x Micro-SIM slot w/ cover
Right Side
– 1 x Power button
– 1 x USB 2.0 type A connector w/ cover
– 1 x Mic-in (mono), 1 x Line-out (mono) w/ cover

I/O Interface-Rear

1 x Full RS232 (COM, w/ 5VDC, 12VDC)
1 x Power connector, M12 A-coded 5-pin
1 x 10/100/1000 Mbps LAN, M12 A-coded 8-pin
1 x M12 A-coded 8 pin for 2 x USB 2.0
1 x M12 (MULTI PORT1, A-coded 12-pin)
– 2 x GPI
– 2 x GPO
– 1 x Isolated CANBus 2.0B
– PWM (speed)+Direction+GND
1 x M12 (MULTI PORT2, A-coded 12-pin)
– 1 x RS232 (Tx, Rx)
– 1 x RS232 (Tx, Rx)/RS422/RS485
– 4 x Composite video input
2 x SMA connector for WWAN
3 x SMA connector for WLAN
1 x SMA connector for Bluetooth
1 x SMA connector for GNSS

Power Management

9V ~ 60V DC in
Back-up battery for approx. 20 min of operation (optional)
Reverse protection/over voltage protection/under voltage protection
Ignition on/off control & programmable on/off delay timing
Wake up by SMS, RTC and ignition

Power Design & Protection

RFID Module (optional)

13.56-MHz RFID/contactless standard protocols
Compatibles with all major global secured baseband ISO standards including ISO14443 Type A, MIFARE classic cards, and Smartlabel ISO15693

Operating System

Linux

Dimensions

250x179x67.5 mm

Weight

2.4kg

Mechanical

Cooling system: fanless
Enclosure: plastic
IK Rating: IK08 (housing and touch screen)
Mounting: VESA 75
Ingress protection: complete IP65

Operating temperatures

Ambient with air -40°C to 70°C, ambient with air and without battery

Storage temperatures

-40°C to 80°C

Relative humidity

10% to 90% (non-condensing)

Vibration

2g@5~500 Hz (in operation)
– Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
– Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24

Shock

Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 40g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75g

Standards/Certifications

CE/FCC class B/E13/IK08

Data Sheet

Download / View