Amplicon Middle East-Advantech-ADAM-6022
  • ADVANTECH

ADVANTECH ADAM-6022

6AI/2AO/2DI/2DO Ethernet PID Module

Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.
Add to WishlistAdd to Compare

KEY FEATURES:

  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Watchdog timer to recover the system
Amplicon Middle East-Advantech-ADAM-6022
Channels

6AI/2AO/2DI/2DO Ethernet PID Module
Loop Number

2 (3 AI, 1 AO, 1 DI, 1 DO for each control loop)
Analog Input Range

±10 VDC, 0 ~ 20 mA, 4 ~ 20 mA
Analog Output Type

V, mA
Analog Output Range

0 ~ 10 VDC, 4 ~ 20 mA, 0 ~ 20 mA
Dry Contact

Logic level 0: close to GND, Logic level 1: open
Wet Contact

Logic level 0: 0 ~ 3 VDC, Logic level 1: 10 ~ 30 VDC
Power Dissipation

300 mW for each module
Input Impedance

20 MΩ
Accuracy

±0.1% of FSR
Resolution

16-bit
Sampling Rate

10 sample/second
CMR @ 50/60 Hz

90 dB
NMR @ 50/60 Hz

60 dB
Span Drift

±25 ppm/° C
Zero Drift

±6 μV/° C
Protection

Isolation Protection : 2,000 VDC, Built-in TVS/ESD Protection, DI Over Voltage Protection : 35 VDC, Power Reversal Protection
Certification

CE, FCC, UL
Power Consumption

4 W @ 24 VDC
Power Input

10 ~ 30 VDC
Operating Temperature

-10 ~ 50° C (14 ~ 122° F), D version: -40 ~ 70° C (-40~158°F)
Storage Temperature

-20 ~ 80° C (-4 ~ 176° F), D version: -40 ~ 80° C (-40~176° F)
Operating Humidity

20 ~ 95% RH (non condensing)
Storage Humidity

0 ~ 95% RH (non-condensing)

Data Sheet

Download / View